Link to tool hints
During the years we have got a lot of questions about special tools. Tools that we do not have in our regular assortment. Tools that should fit for a special need.
Now we have been taken pictures of them and maybe there are someone else that have a simular need. We do not have the tools ready in stock so there can be some time before we could make them.
 
Bottom wood turning hook

Total length: 320mm
Edge length: 30mm
Edge width: 12mm on the widest
With the bottom turning hook can you turn a level bottom in a bowl.
The handle is made of elm and provided with an brass ring.

Mini wood turning hook-hook

Total length: 290mm+60mm
The hook: Diameter 8mm

With mini turning hook-hook you can turn the inside of a bowl
there the opening of the bowl is smaller then the inside. It has one grinded surface on the outside.
The handle is made of elm.

Mini-mini wood turning hook

Total length: 360mm (with shaft)
The hook: Diameter 5mm

With mini-mini turning hook you can turn inside in very small bowls.
It has one grinded surface on the outside.
The handle is made of elm and provided with an brass ring

Straight Ring tool

Total length: 350mm
The Ring: Diameter ca. 35mm
Width over the blade: 12mm

Straight Ring tool are good when you want to make deep bowls.
The handle is made of elm.

Inshave

Edge length: 140mm
The blade width: 30mm
Thickness: 5mm
The grinded surface is on the outside.

Inshave uses to hollowe-out trough and dishes. The handles are made of elm.

Gouge with hooked neck

Total length: 280mm (with shaft)
Gouge: Diameter 30mm
The edges width: 26mm

This special gouge has the grinded surface on the inside of the gouge.
The handle is made of elm and provided with an brass ring.

Mini chisel

Total length: 150mm
The blades length: 70mm
The blades width: 12mm
The blades thickness: 2,5mm

A small chisel for small works. The handle is made of elm.
The mini chisel i also included in the Small Carving set.
See down page.


 

Mini spoon carving knife

Total length: 140mm
The blades length: 45mm
The blades width with the handle: 8mm
The blades opening: 12mm

The Mini spoon carving knife has a small and narrow blade that would be suitable for really small spoons and bowls.
The handle is made of elm
You can order the Mini spoon carving knife on the page Spoon knives.

 

Crook knife

Total length: 130mm (unshafted)
The edges length:110mm
The edges width: 15mm on the widest

The Crook knife is suitable for bowls. It has the grinded surface on the inside. We have the Crook knife in both right and left version. On the picture you can see a right version.
You can order the Crook knife on the page
 Spoon knives.
We only deliver the Crook knife unshafted.

 

Small inshave

Total length: 150mm
The edges length: 50mm
The blades width: 19mm
The blades opening: 30mm

With this inshave you can hollow out bowls. The grinded surface is on the inside.
The handle is made of elm

Straight beating gouge

Total length: 310mm (with shaft)
The edges width: 40mm
Gough: Diameter 100mm

Straight beating gouge is made of thick steel. You use it too fine carving in bowls, trough and dishes.
The handle is made of ash and provided with brass rings.

Draw knife

Edge length: 120mm
Width: 75mm
Deep on the middle: 40mm
Thickness: 5mm

This special draw knife is used too make an hole on the underside on the stock at timbering.
The handle is made of elm.

Timber framing tool

The blades length: 210mm
The edges width: 50mm
The blades thickness: 5mm

Special chisel for timber framing. The handle is made of ash and provided with brass rings.

Splitting draw knife

Edge length: 250mm
Width: 50mm
Thickness: 5mm

Splitting draw knife can be used when you want to split splinters.
The handle is made of ash

Beat on the steel can give vibrations in the handles
and they will not hold.
If you want to beat on the steel we recommend
the Splitting iron, froe, instead.


 

Draw knife

Edges length: 200mm
The blades width: 20mm
The blades thickness: 3mm

The draw knife has a longer edge then our regular draw knife 140mm. You can find that under Products. Choose draw knife.
The handles is made of elm.

Hoof knife

Total length: 210mm
The edges length: 61mm
The edges width: 14mm close the handle

A knife for the horses hoofs.
The handles is made of ash.

Hoof knife

Total length: 33cm
Thickness: 5mm
The edges lengt: 9cm

A knife for horses hoofs
 
Bee keeping scraper

Total length: 250mm
The edges width-blade: 50mm
The edges width-scraper: 45mm
Carving knives

On the top: Carving knife 20x80
The blades length: 80mm
The blades width closest the handle: 20mm
The shafts length: 110mm
Size on the middle of the shaft: 34*25mm

Lowest: Carving knife 22x100
The blades length: 100mm
The blades width closest the handle: 20mm
The shaft: look above
These carving knives have a thicker handle then our regular carving knives.
 

 

Mini adze 

Total length: 23cm
Weight: 0,4 kg

A small and light adze for small hands and small works. Inside of small bowls and troughs for example.

Awl

Total length: 150mm
Thickness near the handle: 5mm

The awl is a pointed tool that you use to make small holes in tree and lether. This awl is forged angular.

Flat adze 

Total length: 23cm
Weight: 0,4 kg

A small and light flat adze for small hands and small works. A special made tool for boat building and timbering.
Backpack axe   with edge protection in leather

Total length: 25cm
Weight: 0,4 kg

A small and light cutting axe to take with you on the outdoor trip or hunting.
You can order the backpack axe on our axe side.

Wedge  

Length: 15cm
Weight: 0,5 kg
 

Timber hook

Length: 38cm
Hooks length: 10cm

 

Mini gouges

Seen from the left:
Mini gouge 20-12, total length 11cm,
Mini gouge 10-8, total length 13cm, 
Mini gouge 5-4, total length 13cm,

Three straight and short gouges. Their thin blades give fine control when making spoons and fine carving work.
Read more under  tool hints for carving and engraving.

 

 

Draw knife handles in 45 degree angle.

Edges length: 190mm
The blades width: 20mm
The blades thickness: 3mm


The handles is made of elm.




 

Small Carving Set in a textile pocket

The pocket contains five tools that are suitable for small sculpturing, engraving and linocutting.

All the tools have a total length of 15 cm

Seen from left:
oblique chisel,  edges length 15mm
Chisel, edges width 12mm
Straight gouge,
ø10mm, edges width 11mm
Bent gouge,
ø20mm, edges width 13mm
Straight gouge,
ø30mm, edges width. 13mm

(Textile pocket, together with the tools

You can order the set under other products

.

 

Cut-tool

A small short tool to make small cut, for ex when dekoreting violins.

Handles length: 6,5 cm
Blades length: 3,2 cm
Edges width: 1,2 mm
 

 

 

 

 

 


S. Djärv Hantverk AB

Sör Nävde 15
SE-774 92
Avesta Sweden
Tel/fax: 0226-221 41
int. +46 226 221 41
Mail info@djarv.se
Reg.nr. 556425-1568

The page last updated by den 24 augusti 2017 of: info@djarv.se (Elsa Djärv)